Use:

LME are used for the startup and supervision of 1- or 2-stage gas burners or gas burners in intermittent operation. Flame supervision takes place via an ionization probe or a QRA2 / QRA2(1) / QRA2(2) / QRA2.9 / QRA4.U / QRA10.C UV flame detector with AGQ3.xA27 ancillary unit for forced draft gas burners, or, in the case of blue-burning flames, with a QRC1 blue-flame detector. In terms of housing dimensions, the LME are identical with the burner control LGB and LMG burner controls (refer to Type summary).

• Applications in accordance with EN 676: Forced draft burner for gaseous fuels

• Type-tested and approved in accordance with DIN EN 298

Features:

• Undervoltage detection

• Air pressure supervision with functional check of the air pressure switch during startup and operation (depending on the respective type)

• Electrical remote reset facility

• Multicolor indication of fault status and operational status messages

• Limitation of restarts

• Accurate control sequence thanks to digital signal handling

• Controlled intermittent operation after a maximum 24 hours of continuous operation